Trippingly

View Original

Liquid LSD | Liquid Acid

Other useful resources: How to Change Your Mind, (annotated summary); Phases of an LSD Trip; How to Find a Psychedelic Guide

An Overview

Liquid LSD, Sandoz Corp (now Novartis)

LSD begins its life as a crystal, and from there is distributed in consumable form. In the 60s, “microdots” (tiny pills) and gelatin pills (window panes) were often distributed, along with blotter. Today, blotter paper is the main form in which acid is distributed, although liquid and gel tabs are sometimes encountered as well.

Regardless of the ultimate form it’s distributed, LSD is first dissolved in a solvent, typically either ethanol (Everclear) or a mix of ethanol and distilled water. It is then made into a paste with binding agents and put in a mold to create microdots, has gelatin added to it to make window pane (gel pills), added to blotter paper to make tabs, or sold in liquid form.  

How to Take Liquid LSD

Many people who use LSD regularly prefer liquid acid to all other forms, because when properly stored, it can last for many years, absorbs quickly and is easy to effectively split.

Most people prefer to have some food in their stomach, but only a light snack. It is important to avoid drinking tap water, as the chlorine and certain other chemicals used in municipal water supply will destroy LSD on contact. Even bottled water may contain these chemicals, so avoiding drinking water for an hour or so before tripping may be advised.

The simplest way to take liquid LSD is to apply a drop to a sugar cube or on a spoon, place in one’s mouth and keep it there as long as possible to allow it to absorb through the skin. LSD is rapidly absorbed under the tongue (sublingual), and sublingual absorption eliminates any concern around having food in the stomach that might slow absorption. Or worse, having chlorinated water one’s stomach, destroying the LSD.

One should avoid putting liquid LSD directly from the bottle to your mouth to avoid ending up with two drops or zero drops, as it can be surprisingly challenging to see drops. Dispensing onto a medium such as a sugar cube or onto a spoon reduces error. We always have two people watch when we distribute a dose, especially if re-dosing while intoxicated.

Avoid putting doses on anything too small, or medium that has no absorption, as in either case the drop may run off.

When distributing liquid LSD it is important to hold the bottle directly vertical, and to slowly and gently squeeze the bottle to get a uniform drop.

If you plan to split a dose, you will want to read our article “Volumetric Dosing of LSD and Splitting LSD Doses”.

Becoming an Expert on Liquid LSD

The information above is probably all the information one needs to take liquid LSD. Those who want to fully understand the dosing of LSD should read on.

How Liquid LSD is Dosed

There is no standard potency of a drop of liquid LSD. A single drop typically ranges from 75 ugs to 300 ugs, but could be lower or higher.

The manufacturer of liquid LSD will determine the potency of each drop, by controlling the ratio of crystalline LSD to the alcohol/water solvent used.  For example, if a manufacturer wants a 125 ug dose from a single drop and one assumes a standard dropper bottle dispenses 0.05 ml per drop of LSD (this is a commonly used assumption), then one must mix a concentration of 125 ug of LSD per 0.05 ml of final solution.  

If preparing 10,000 drops, one would need 1,250,000 ug of LSD (125 ug x 10,000 units = 1,250,000 ug, or 1.25 grams). One would also need enough solvent to produce 500 ml of final liquid.  In this final solution, each 0.05 ml drop of solution contains 125 ug of LSD. (As an aside, the density of LSD is 1.2±0.1 g cm−31.2±0.1 g cm−3, and therefore 1.25 grams of LSD is around 58 ml.  So one would use 442 ml of solvent for 1.25 g of LSD to produce 500 ml of LSD solution).  

The key fact is that a single 0.05 ml drop of solution from a dropper bottle consists of a specified amount of LSD and the rest is an inactive solvent.  The strength of the LSD dose can be changed by increasing the ratio of LSD to solvent in the solution.  

To get a desired dose, two conditions must be true:  (i) the LSD solution is at the desired concentration (e.g., 125 ug per 0.05 ml), and (ii) the dispensing device consistently distributes the desired amount of liquid (e.g., 0.05 ml per drop).

Accuracy vs. Precision

When considering methods of dispensing liquids, like a dropper bottle, "accuracy" refers to getting the desired amount of liquid on average.  For example, if we want a 0.05 ml drop, but our dropper gives out five drops: a .03, a .04, a .05, a .06 and a .07 drop, its average is exactly 0.05 ml, and it is therefore an accurate dropper. 

"Precision" refers to getting the same amount of liquid each time, whether or not it is the actual desired amount.  So the dropper in the example is not precise, but it is accurate.

Ideally, we would want our dose of LSD to always be the exact dose we want.  In other words, in our case we want every drop to be exactly 0.05 ml; a drop that is both accurate and precise.  

If the LSD solution were correctly prepared, so that each 0.05 ml drop contained 150 ug of LSD, the dose of LSD would also then be exactly what we want (and be both accurately and precisely dosed).

Getting the "Right" Dose

In a perfect world, we would get the exactly correct dose every time, with the LSD solution having the correct concentration and the dosing method (e.g., a dropper bottle) dispensing the correct amount of liquid. 

Unless one either: (i) has crystal LSD and makes the solution themselves, (ii) buys from a source that is both highly competent and honest, or (iii) or one has access to sophisticated laboratory testing to determine the concentration of LSD in the solvent, it is not possible to calculate the exact concentration of the liquid LSD.

In other words, we can not calculate an accurate dose, because without knowing an accurate concentration we can never know how much LSD is in any dose.  And that turns out that's totally fine...

We probably won't know how much LSD is in a dose and therefore we won't have an "accurate" dose (or at a minimum will have no way to know whether we have an accurate dose).  However, we can have a "precise" dose every time by using liquid LSD of a consistent (but unknown) concentration and measuring the identical volume of liquid for each dose every time.    

While we may not know what the actual dose is, we can take the identical dose every time.  Or we can increase the dose by a percentage and know how much we are taking relative to the other times we took it.  This, it turns out, is plenty of information. Simply imagine a world where you had one very large bottle of LSD, and you had never even heard of mics/ug’s. You would simply talk about doses as “a half a drop”, “one drop”, “two drops”, etc. And this would be all the information you’d need. If you knew how strong an experience you’d have with “one drop”, you wouldn’t care how many ug were in the drop. So the best way to get an “accurate” dose, is to have a significant supply of LSD, and store it so it does not degrade. The second best way to gauge doses is to have a single supplier who is skilled at dosing.

Thoughts About LSD Dosing

Erowid and other sources provide the following guidance on doses:

  • Light Dose: 20 - 75 ug

  • Common Dose: 50 - 150 ug

  • Strong Dose: 150 - 400 ug

  • Heavy Dose: 400 + ug

The ranges are very broad, and the descriptions very vague.  It just gives the most basic of information.  A starting point for a new user, but otherwise not very useful.  However, once a user has taken a precisely measured trip, they have established a "baseline trip".  They have no idea of the actual amount of LSD they have ingested, only the actual volume of liquid they have ingested.  They can then adjust dose higher or lower to obtain a more or less intense LSD effect.

One need never know how much LSD is actually ingested, and instead only know that the dose is the same as the baseline, 10% higher than the baseline, 20% lower, etc.  So with precise measurements, one gets all the information they need.  The actual amount of LSD ingested is essentially irrelevant after the first time.  Only the amount taken versus other trips in the critical information.  

We have prepared this article on the phases/stages of an LSD trip, which also includes a more detailed description of the effects of different doses. This article has been vetted on every major message board, and comments from literally hundreds of users have been incorporated. It is re-submitted every year on Reddit for public comment (the past few years it has received almost universal approval for being accurate, with few suggested changes. And therefore we believe it to be the best guide available on LSD doses and the stages of an acid trip.

So now all is needed for precise dosing is having a consistent LSD concentration and then measuring the liquid dose with precision.

Consistent LSD Concentration

There are two ways to have LSD of a consistent concentration when obtaining liquid LSD.  First, one can purchase a larger quantity of liquid LSD and do everything possible to avoid degradation over time.  Second, one can find a reliable source for liquid LSD and confirm with the source that the methodology for creating the LSD solution does not change over time.  

Each approach has pros and cons, but either can be effective.  We believe that properly stored liquid LSD does not demonstrate substantial degradation even over substantial periods of time.  There is a debate over what temperature to store liquid LSD at, including whether to freeze it.  However, we believe that liquid LSD, stored in the dark in a glass bottle at room temperature will not show notable degradation over many years.  We are aware of a user having stored a bottle for over five years for the sole purpose of determining degradation, and has seen no notable change in efficacy over this period.  This person believes in purchasing larger quantities of liquid LSD, and store it.  It is important to understand the legal implications, however, of possessing a significant number of doses.  In Oregon, for example, you may possess forty "units" of LSD to qualify for the "decriminalization" laws.

Measuring a Precise Dose

Liquid LSD is likely to come in a dropper bottle, with a specific doseage associated with a single drop of the solution.  So the first question is whether the dropper bottle will deliver consistent quantity of liquid in each drop.  

Fortunately, there is plenty of scientific interest as to whether dropper bottles deliver consistent sized drops, especially related to the delivery of glaucoma medication.  See Reliability of drop size from multi-dose eye drop bottles: is it cause
for concern?
   Unfortunately, this analysis is very complex - here's an example, if you would like to see just how complex it is.

However, a few key points are critical:

First, there is no standard manufacture process even for dropper bottles designed for the medical or scientific industry.  See Guidance for industry: container closure systems for packaging human drugs and biologics. US Department of Health and Human Services, Food and Drug Administration May 1999.

Second, scientific testing of medical grade dropper bottles shows variations of up to 25% between the largest and smallest drop of medication (most studies on the precision of dropper bottles focus on the delivery of glaucoma medication) between different bottles, and significant variation among drops from a single bottle.  See An objective assessment of the variability in number of drops per bottle of glaucoma medication

Third, the angle the dropper bottle is held influences the volume of the drop. Gaynes BI, Singa RM, Schaab G, Sorokin Y. Impact of administration angle on the cost of artificial tear solutions: does bottle positioning minimize wastage? J Ocul Pharmacol Ther. 2007

Fourth, viscosity, surface tension and density is an important factor in drop size, and the temperture of the dispensed liquid impacts viscosity. See Variation in the volume of lubricating eyedrops available in the brazilian market, 2017

And there are other, less impacting factors, such as how hard the bottle is squeezed, which impacts how quickly the drop is formed, for example.  

Minimizing Drop Volume Variation

Our primary concern is to get identical volume in each drop.  From a practical perspective, if using a plastic dropper bottle:

  1. Scientific grade bottles should be used. The dropper bottles should feature a tip designed for scientific applications, such as Thermo Scientific™ Nalgene™ LDPE Dispensing Tips for Dropper Bottles. The cost of obtaining a dropper bottle with this type of tip is less than $0.50 per bottle, cheaper than using a breath mint bottle, with reduced risk for either contamination from residue and increased accuracy in dosing. If you have a relationship with your supplier, have this conversation. The cost of a lifetime supply of bottles is around the same as selling two bottles filled with LSD.

  2. The same type of dropper bottle should always be used to minimize cross brand variations.

  3. The dropper bottle should always be held at a consistent angle when administering drops. Held absolutely vertical, with the tip below the bottom of the bottle is recommended.

  4. The temperature of the LSD at time of administration should be consistent between uses to have a consistent viscosity.

Because we only care about consistency, simply using a single bottle, at a consistent temperature, consistent (slow) squeeze pressure and held at a consistent angle will eliminate much of the variation in the size of each dose.  If each user buys their own bottle, stores it properly, and administers their own drop, the user should have a fairly precise dose each time.

However, there are even more precise methods to measure the liquid volume of a dose, and therefore increase dose precision.

Alternatives to the Dropper Bottle

The most useful alternative to relying upon a dropper bottle is to buy a micropipet to measure consistent 0.05 ml drop sizes.  This approach will give high precision measurements.

If one is willing to spend $175, one approach is to buy an adjustable volume micropipet like this one.  After learning the correct technique for using one (see this video), one is able to accurately and consistently measure small quantities of liquid.  Or one could try the less expensive options like this.

Another method to increase the precision of a dose is to measure out a larger number of doses (say 20) into 200 ml amber glass lab container, using the standard dropper bottle.  If the dropper bottle is generally accurate but not precise, it should still have measured approximately 20 doses (although any given drop may have been more or less than a dose).  The volume should be 1 ml, although it is not practical to measure this without lab equipment.  One then adds a fixed amount of either distilled water or ethanol (or, as we prefer, a 50/50 mix of the two).  For example, one may add 199 ml of the distilled water/ethanol mix to the 1 ml of LSD solution, yielding 200 ml of solution, and an aggregate of 20 doses. Therefore, 20 ml of the new solution will contain one dose of LSD. Using a 20 ml scientific syringe, which costs around $20, one can measure a dose with high accuracy. Even if the measurement measurement is off by a full milliliter, the dose is measured with 95% precision, a range that would not be perceivable to the average user.

Note, it is critical that one use the proper substances to dilute LSD.  Tap water will likely destroy LSD.  Ethanol and distilled water are ideal.  "Everclear" is 92.4 percent grain alcohol, and is commonly used for dilution.  Reddit users commonly refer to using Vodka to dilute LSD, as it is more readily available and certainly should work well if the LSD is not subsequently stored for an extended period.